kimiapikey.comGuide
Kimi API Key Not Working: Causes, Fixes, Fallback
If your kimi api key not working error shows up as 401, 404 or 429, the cause is almost always one of five things: the wrong base URL, a mismatched key, no balance, a rate limit, or a model name the endpoint does not know. Work through them in this order.
Updated


Key points
- A key only works against the provider that issued it, so base URL and key must come from the same dashboard.
- 401 means the key was rejected, 404 usually means a bad path, 429 means you hit a limit or the service is busy.
- Print the status code and response body before changing anything else.
- Keep a second OpenAI-compatible endpoint configured so one outage does not stop your app.
Read the status code first
Before you regenerate anything, look at what the server actually said. Most OpenAI-style clients hide the body behind a generic exception. Print both the status and the text.
curl -i https://api.kimiapikey.com/v1/models \
-H "Authorization: Bearer $YOUR_KEY"
The first line of the reply tells you where to look:
| Status | Usual meaning | Start with |
|---|---|---|
| 401 | Key rejected | Key copy, key and base URL from different providers |
| 404 | Path or model not found | Missing /v1, doubled path, wrong model ID |
| 400 | Request body invalid | Parameter names, message format, body size |
| 429 | Limit hit or service busy | Request rate, parallel calls, retry timing |
| 5xx | Server side problem | Retry with backoff, then switch to a fallback |
If you get no HTTP response at all (a timeout or a DNS error), the problem is the network or the hostname you typed, not the key.
Base URL and key must belong together
This is the most common reason a fresh key fails. Keys are issued per provider. A key from one dashboard is simply unknown to another provider's servers, so it returns 401 even though the key is perfectly valid where it came from.
Check these points:
- The key and the base URL come from the same account page. If you copied the key from one provider and left an old base URL in your config, the request goes to the wrong place.
- Environment variables are not shadowing your code. The OpenAI SDK reads
OPENAI_API_KEYandOPENAI_BASE_URLwhen you do not pass them explicitly, so a stale shell variable can override what you wrote in the file. - There is no whitespace or newline at the end of the key. A trailing newline from a copy and paste is a classic cause of 401.
- The header is exactly
Authorization: Bearer <key>. Some tools expect the key in a different header and need the OpenAI-compatible mode switched on.
Editors and chat front ends add one more trap. Many of them keep a separate field for the "OpenAI base URL" and a separate toggle that enables it. If the toggle is off, the app quietly keeps calling the default host with your new key, and you get a 401 that looks like a bad key. Save the settings, restart the app if it caches them, and send one short test message before you test anything complicated.
The base URL should end at /v1, not at the host and not at /v1/chat/completions. The SDK appends the rest. A URL that already includes the full path ends up as a doubled path and a 404.
Regional access, proxies and corporate networks
Sometimes the key is fine and the request never reaches the right server. Provider availability can depend on where you connect from, and a VPN, a corporate proxy or a firewall rule can block or rewrite traffic. Look at the provider's own documentation or status page for their supported regions, and do not assume the rules are the same as for another service.
A quick isolation test: run the same curl command from a different network, such as a phone hotspot. If it works there, the key is good and your network is the cause. If the proxy sets HTTPS_PROXY, check that your HTTP library actually respects it; some tools ignore it and fail with a connection error.
Balance, quota and what a rate limit looks like
A key can be valid and still refuse requests because the account has no credit left or a quota is used up. Check the dashboard before you debug code. If you have never topped up, remember that free allowances are usually small and short-lived.
A 429 is a different story. It means the server is slowing you down, not that the key is bad. On the endpoint described on this site, a full key allows 8 concurrent requests and 300 requests per minute, and a trial key allows 2 concurrent and 60 per minute. When you exceed them the API returns HTTP 429 with the error code rate_limited (too many per minute) or concurrency (too many at once). Temporary overload also returns 429, with a Retry-After: 5 header.
Two habits fix most of these. Honor Retry-After when it is present, and cap your parallel workers at the concurrency limit. A streamed request keeps its slot until the stream ends, so a stalled stream counts against you longer than you expect.
Model name, parameters and body size
A 404 or a 400 with a valid key usually points at the request itself. Three things to check:
- Model ID. Every provider has its own model names. Ask the endpoint what it serves with
GET /v1/modelsand copy the ID from the reply. On this site the ID isuncensored. - Parameters. Names such as
max_tokens,temperatureandresponse_formatare standard, but a provider may accept only a subset. Remove optional fields until the request passes, then add them back one at a time. - Size. Very large prompts can fail on body limits before the model sees them. Here the maximum body is 8 MB and the context window is 100,000 tokens for prompt and completion together.
Streaming is another place where a working key looks broken. If a request succeeds without stream: true and fails with it, the cause is often a proxy that buffers or cuts server-sent events, not the endpoint. Turn streaming off to confirm, then look at the proxy settings.
If you only changed the model name and the call broke, put the old name back to confirm that the rest of your setup is fine.
Keep a fallback endpoint ready
Even a healthy provider has bad hours. If your product depends on one key, a single failure becomes your outage. Because the OpenAI request format is shared, you can keep a second endpoint configured and switch with a couple of lines.
The endpoint at this site is OpenAI-compatible, so it slots in as a second provider. It is an independent hosted open-weight model, not Moonshot's official service, and it will answer differently than a Kimi model, so test your prompts before relying on it. Here is a small wrapper that tries the primary first and falls back on errors:
import os
from openai import OpenAI
primary = OpenAI(base_url=os.environ["PRIMARY_BASE_URL"],
api_key=os.environ["PRIMARY_KEY"])
fallback = OpenAI(base_url="https://api.kimiapikey.com/v1",
api_key=os.environ["FALLBACK_KEY"])
def ask(messages):
try:
r = primary.chat.completions.create(
model=os.environ["PRIMARY_MODEL"], messages=messages, timeout=30)
except Exception as e:
print("primary failed:", e)
r = fallback.chat.completions.create(
model="uncensored", messages=messages, timeout=60)
return r.choices[0].message.content
print(ask([{"role": "user", "content": "Say hi in five words."}]))
Pricing is pay as you go: $0.15 per 1M input tokens and $0.50 per 1M output tokens from prepaid credit that never expires. Failed or refused requests are not charged, so a fallback that rarely runs costs almost nothing to keep. Top-ups start at $20; see pricing for the bonus tiers.
Test the fallback in two minutes
New users can claim $0.50 of trial credit with one click on the API key page after sign-up. It needs no card and is valid for 7 days, which is enough to run your real prompts through the endpoint once. Then run the smoke test below.
curl https://api.kimiapikey.com/v1/chat/completions \
-H "Authorization: Bearer $FALLBACK_KEY" \
-H "Content-Type: application/json" \
-d '{"model":"uncensored","messages":[{"role":"user","content":"ping"}]}'
Check the X-Balance-USD response header to see your remaining credit. The full request reference is in the docs. If you are wiring this into an editor, the existing walkthrough on using a Kimi-style API key in Cursor shows where the base URL field lives, and the Kimi API key overview explains how this endpoint relates to the model you were using.
More guides
Frequently Asked Questions
Is the model the same as Moonshot's official Kimi?
No, we host an open-weight model that is tuned to be uncensored. It is not GPT, Claude, Gemini, Grok, DeepSeek, or any other vendor's model. It is a distinct model run on our own servers.
Do you train on my data?
No. Your prompts and completions are not used for training. We value privacy and transparency, so your data remains yours.
What are the rate limits?
You are limited to 300 requests per minute per key. The maximum request body size is 8 MB. These limits are designed to ensure stable performance for all users.
What is the content policy?
The model is uncensored regarding adult, controversial, and creative topics. However, we do block sexual content involving minors. This is a hard limit that always applies, regardless of your subscription level.
Questions and answers
Why does my new key return 401 right away?
The most common reasons are a key sent to a different provider's base URL, a stray space or newline in the copied key, or an environment variable overriding your code. Test with curl to rule out your SDK.
Is a 429 the same as a bad key?
No. A 429 means you hit a rate limit, a concurrency limit or a temporary overload. The key is valid. Wait for the Retry-After value and lower your parallel requests.
Do failed requests cost money here?
No. Failed or refused requests are not charged on this endpoint, so retrying a broken call does not drain your credit.
Can I use this endpoint as a drop-in for a Kimi model?
It speaks the same OpenAI request format, so the code change is a base URL, a key and the model ID uncensored. The underlying model is different, so responses will not match; test your prompts first.
Your key is one form away
Create an account, copy the key, change the base URL. That is the whole setup.